Изборник
GASOLIne
Long-term endurance tests demonstrated a positive influence of the additive on the engine's reliability and operating life.
The tests revealed a reduction of carbon formation and peak loads with uniform fuel combustion.
GreenFuel distributed products ensures efficient performance of the comprehensive neutralization system, guaranteeing compliance with the EURO-5 and EURO-6 standards. Particular efficiency was demonstrated when the car was used in the urban environment.
Reduction of fuel consumption
Reduction of fuel consumption:
Reduction of fuel consumption
Reduction of fuel consumption
Fuel– EURO – 5 gas.Oil lubricant– Shell.P — 99.3 kPa.t at the intake — 29°С
DIESEL
Improvement of the active phase of the diesel fuel combustion process resulted in less engine vibration and noise.
The tests conducted with the GreenFUEL catalyst demonstrated increased power and reduced fuel consumption.
Reduction of fuel consumption
Reduction of fuel consumption:
Reduction of fuel consumption
Reduction of fuel consumption
Fuel — diesel ЕURO-4. Oil lubricant — Shell. P — 98,2 kPa.T at The intake — 28,2 °С
DIESEL
Adding the solution catalyst to diesel fuel resulted in faster and more uniform combustion, significantly enhancing engine efficiency and reducing fuel consumption in different driving modes.
Deeply cleaning the fuel system and the engine's working elements from the gum, wax, varnish, and carbon deposits improved the internal technical condition, effectively reducing operating costs.
GreenFuel distributed product was particularly effective under cold start conditions and at the stage of engine warm-up in the urban operation mode.
Reduction of fuel consumption
Reduction of fuel consumption
Environmental effect (average)
Atmospheric pressure – 91kPa. Temperature at the intake not less than 3°С. Relative air humidity -95%
DIESEL
Rwanda, Kigali
Adding GreenFuel solutions to diesel resulted in faster and more uniform combustion, significantly enhanced engine efficiency, and reduced fuel consumption.
FUEL – DIesel 1 BUS – DISTANCE 11123 KM
DIESEL
Testing on РТ646 ship revealed a decrease in the engine’s temperature, noise, and vibration, as well as the easier start-up of the engine.
Sleeve assembly and parts in the rubbing contact wear diminished, fuel system clean-up and fuel consumption reduced from 110kg/h to 81,5kg/h.
Atmospheric pressure—99,3kPa. Temperature at the intake—3°С. Relative air humidity -95%
DIESEL
Democratic Republic of Congo, Goma
Our distributed additive demonstrated an increase in power, reduction of fuel consumption, and a strong environmental effect
Reduction of fuel consumption
Reduction of fuel consumption
Environmental effect (average)
Environmental effect (average)
Environmental effect (average)
Atmospheric pressure—99,3kPa. Temperature at the intake—3°С. Relative air humidity -95%
DIESEL
Democratic Republic of Congo, Goma
Environmental effect (average)
Environmental effect (average)
Environmental effect (average)
Adding GreenFuel solutions to diesel resulted in faster and more uniform combustion, significantly enhanced engine efficiency, and reduced fuel consumption.
Distance – 196 km. Route: Goma – Bukavu – Goma. Temperature – 28°C. Relative air humidity – 95%
HEAVY FUEL
GreenFuel solutions significantly enhanced metal smelting efficiency at a metallurgical plant by achieving a 9.4% reduction in fuel consumption and decreasing smelting time by 6%. The catalyst also increased the flame temperature to 2,000°C and reduced emissions of CO, CH, and ash without affecting the steel's quality. This showcases GreenFuel's ability to increase production efficiency while minimizing environmental impact.
Sulfur content — 0,91%. Heat carrier working pressure at the outlet — 0,7 MPа.
HEAVY FUEL
Using GreenFuel solutions in fuel oil and furnace fuels significantly increases the completeness and intensity of combustion. The accompanying deep cleaning of the thermal exchange surfaces increases the heat transfer factor. The gradual cleaning of internal surfaces of reservoirs and pipes and more effortless fuel flow lead to an additional reduction of operating costs. Harmful air emissions are decreased significantly.
Depending on the boiler operation mode
Environmental effect (average)
Environmental effect (average)
